Controller: LCD Control Panel
Max. Temperature: 390°F (200°C)
Timer Range: Up to 300 seconds
Product Dimensions (LxWxH): 11.4 x 11.4 x 5.9 inches
Product Weight: 6.6 lbs (3 kg)
Packaging Dimensions (LxWxH): 16.1 x 13.8 x 9 inches
Package Weight: 15.4 lbs (7 kg)
Certifications: CE / RoHS Compliant
Instructions
Read the Instruction Guide: Carefully read and understand the user manual included in the package for full safety, setup, and usage instructions.
Set Up the Machine: Place the heat press on a flat, heat-resistant surface in a well-ventilated area. Plug the machine into a compatible power source (110V or 220V).
Power On and Adjust Settings: Use the LCD control panel to turn on the machine. Set your desired temperature (up to 390°F / 200°C) and timer (up to 300 seconds) based on your material and transfer type.
Wait for Heat-Up: Allow the press to preheat. The display will indicate when the set temperature is reached and the machine is ready for use.
Prepare the Material: Place your transfer design on the item (e.g., T-shirt, tote bag, apron). Ensure it is properly aligned on a heat-resistant surface or pressing mat.
Apply Heat: Firmly press the machine down on the design. Hold it in place or apply gentle pressure as needed for the duration set on the timer.
Cool & Peel: After the timer finishes, lift the press and allow the transfer to cool if needed. Peel off the transfer sheet according to the recommended method (hot or cold peel).
Turn Off & Store Safely: When finished, turn off the heat press. Always place it back on the insulated safety base and allow it to cool down before storage.
