HP101 - Mini Heat Press

Model: Pressly HP101 - Mini Heat Press

Heat Platen Size: 2.44x4.17 inches (62 x 106 mm)

Heating Modes: Low: 284°F (140°C), Medium: 320°F (160°C), High: 374°F (190°C)

Product Dimensions (LxWxH): 4.25" x 3.94" x 2.44"

Power Requirements: 110V/220V

Plug Type: US Plug

Certificate: CE (EMC, LVD, RoHS)

Package Contains: Mini Heat Press Machine,
Insulated Safety Base, Storage Bag, Water Spray Bottle, and User Manual

Read the Instruction Guide: Carefully read and understand the user manual included in the package for safety precautions and setup instructions.

Set Up the Machine: Place the mini heat press on a flat, heat-resistant surface. Plug it into a suitable power outlet (110V/220V).

Choose the Temperature Setting: Press the power button to turn on the machine. Tap the button again to cycle through the 3 heat settings:
- Low (284°F / 140°C)
- Medium (320°F / 160°C)
- High (374°F / 190°C)
The indicator light color will change with each setting.

Wait for the Heat Up: Allow the heat press to reach the selected temperature. The indicator light will turn to green once it’s ready.

Prepare Your Material: Place the transfer design onto your item (e.g., T-shirt, hat, or bag). You may use the included spray bottle to lightly mist the fabric if needed.

Apply Heat: Hold the mini heat press firmly and move it in small circular motions over the transfer for the recommended time. Apply gentle, consistent pressure.

Cool & Peel: Once done, remove the press and allow the design to cool briefly. Then peel off the transfer film according to your material’s instructions (hot or cold peel).

Power Off & Store Safely: The machine will automatically shut off after 10 minutes of inactivity. Always place it back on the insulated base and let it cool before storing.